Class ParentDevice

java.lang.Object
com.ctre.phoenix6.hardware.ParentDevice
All Implemented Interfaces:
PhoenixAlertable, CommonDevice
Direct Known Subclasses:
CoreCANcoder, CoreCANdi, CoreCANdle, CoreCANrange, CorePigeon2, CoreTalonFX, CoreTalonFXS
public abstract class ParentDevice extends Object implements CommonDevice, PhoenixAlertable
Parent class for all devices.

  • Field Details

  • Constructor Details

    • ParentDevice

      public ParentDevice(int deviceID, String model, CANBus canbus)

  • Method Details

    • getDeviceID

      public final int getDeviceID()
      Specified by:
      getDeviceID in interface CommonDevice
      Returns:
      The device ID of this device [0,62]

    • getNetwork

      public final CANBus getNetwork()
      Specified by:
      getNetwork in interface CommonDevice
      Returns:
      The network this device is on

    • getDeviceHash

      public final int getDeviceHash()
      Gets a number unique for this device's hardware type and ID. This number is not unique across networks.

      This can be used to easily reference hardware devices on the same network in collections such as maps.

      Specified by:
      getDeviceHash in interface CommonDevice
      Returns:
      Hash of this device

    • toString

      public String toString()
      Overrides:
      toString in class Object

    • getAppliedControl

      public final ControlRequest getAppliedControl()
      Get the latest applied control. Caller can cast this to the derived class if they know its type. Otherwise, use ControlRequest.getControlInfo() to get info out of it.
      Specified by:
      getAppliedControl in interface CommonDevice
      Returns:
      Latest applied control

    • hasResetOccurred

      public final boolean hasResetOccurred()
      Specified by:
      hasResetOccurred in interface CommonDevice
      Returns:
      true if device has reset since the previous call of this routine

    • getResetOccurredChecker

      public final BooleanSupplier getResetOccurredChecker()
      Specified by:
      getResetOccurredChecker in interface CommonDevice
      Returns:
      A BooleanSupplier that checks for device resets

    • isConnected

      public final boolean isConnected()
      Returns whether the device is still connected to the robot. This is equivalent to refreshing and checking the latency of the Version status signal.

      This defaults to reporting a device as disconnected if it has not been seen for over 0.5 seconds.

      Specified by:
      isConnected in interface CommonDevice
      Returns:
      true if the device is connected

    • isConnected

      public final boolean isConnected(double maxLatencySeconds)
      Returns whether the device is still connected to the robot. This is equivalent to refreshing and checking the latency of the Version status signal.
      Specified by:
      isConnected in interface CommonDevice
      Parameters:
      maxLatencySeconds - The maximum latency of the Version status signal before the device is reported as disconnected
      Returns:
      true if the device is connected

    • getIsConnectedChecker

      public final BooleanSupplier getIsConnectedChecker()
      Gets a function that checks whether the device is still connected to the robot. This is equivalent to refreshing and checking the latency of a copy of the Version status signal.

      This defaults to reporting a device as disconnected if it has not been seen for over 0.5 seconds.

      Specified by:
      getIsConnectedChecker in interface CommonDevice
      Returns:
      A BooleanSupplier that checks whether the device is still connected

    • getIsConnectedChecker

      public final BooleanSupplier getIsConnectedChecker(double maxLatencySeconds)
      Gets a function that checks whether the device is still connected to the robot. This is equivalent to refreshing and checking the latency of a copy of the Version status signal.
      Specified by:
      getIsConnectedChecker in interface CommonDevice
      Parameters:
      maxLatencySeconds - The maximum latency of the Version status signal before the device is reported as disconnected
      Returns:
      A BooleanSupplier that checks whether the device is still connected

    • optimizeBusUtilization

      public final StatusCode optimizeBusUtilization()
      Optimizes the device's bus utilization by reducing the update frequencies of its status signals. This API defaults to an optimized update frequency of 4 Hz to preserve log data.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once in the robot program. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequencies(). Alternatively, remove this method call, redeploy the robot application, and power-cycle the device on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each signal by default.

      Specified by:
      optimizeBusUtilization in interface CommonDevice
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • optimizeBusUtilization

      public final StatusCode optimizeBusUtilization(double optimizedFreqHz)
      Optimizes the device's bus utilization by reducing the update frequencies of its status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once on this device in the robot program. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequencies(). Alternatively, remove this method call, redeploy the robot application, and power-cycle the device on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each signal by default.

      Specified by:
      optimizeBusUtilization in interface CommonDevice
      Parameters:
      optimizedFreqHz - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • optimizeBusUtilization

      public final StatusCode optimizeBusUtilization(Frequency optimizedFreq)
      Optimizes the device's bus utilization by reducing the update frequencies of its status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once on this device in the robot program. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequencies(). Alternatively, remove this method call, redeploy the robot application, and power-cycle the device on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each signal by default.

      Specified by:
      optimizeBusUtilization in interface CommonDevice
      Parameters:
      optimizedFreq - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • optimizeBusUtilization

      public final StatusCode optimizeBusUtilization(double optimizedFreqHz, double timeoutSeconds)
      Optimizes the device's bus utilization by reducing the update frequencies of its status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once on this device in the robot program. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequencies(). Alternatively, remove this method call, redeploy the robot application, and power-cycle the device on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      Specified by:
      optimizeBusUtilization in interface CommonDevice
      Parameters:
      optimizedFreqHz - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      timeoutSeconds - Maximum amount of time to wait for each status frame when performing the action
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • optimizeBusUtilization

      public final StatusCode optimizeBusUtilization(Frequency optimizedFreq, double timeoutSeconds)
      Optimizes the device's bus utilization by reducing the update frequencies of its status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once on this device in the robot program. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequencies(). Alternatively, remove this method call, redeploy the robot application, and power-cycle the device on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      Specified by:
      optimizeBusUtilization in interface CommonDevice
      Parameters:
      optimizedFreq - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      timeoutSeconds - Maximum amount of time to wait for each status frame when performing the action
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • optimizeBusUtilizationForAll

      public static StatusCode optimizeBusUtilizationForAll(CommonDevice... devices)
      Optimizes the bus utilization of the provided devices by reducing the update frequencies of their status signals. This API defaults to an optimized update frequency of 4 Hz to preserve log data.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once in the robot program for the provided devices. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequenciesForAll(CommonDevice...). Alternatively, remove this method call, redeploy the robot application, and power-cycle the devices on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each status frame.

      Parameters:
      devices - Devices for which to opimize bus utilization
      Returns:
      Status code of the first failed optimize call, or OK if all succeeded

    • optimizeBusUtilizationForAll

      public static StatusCode optimizeBusUtilizationForAll(double optimizedFreqHz, CommonDevice... devices)
      Optimizes the bus utilization of the provided devices by reducing the update frequencies of their status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once in the robot program for the provided devices. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequenciesForAll(CommonDevice...). Alternatively, remove this method call, redeploy the robot application, and power-cycle the devices on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each status frame.

      Parameters:
      optimizedFreqHz - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      devices - Devices for which to opimize bus utilization
      Returns:
      Status code of the first failed optimize call, or OK if all succeeded

    • optimizeBusUtilizationForAll

      public static StatusCode optimizeBusUtilizationForAll(Frequency optimizedFreq, CommonDevice... devices)
      Optimizes the bus utilization of the provided devices by reducing the update frequencies of their status signals.

      All status signals that have not been explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) will be slowed down. Note that if other status signals in the same status frame have been given an update frequency, the update frequency will be honored for the entire frame.

      This function only needs to be called once in the robot program for the provided devices. Additionally, this method does not necessarily need to be called after setting the update frequencies of other signals.

      To restore the default status update frequencies, call resetSignalFrequenciesForAll(CommonDevice...). Alternatively, remove this method call, redeploy the robot application, and power-cycle the devices on the bus. The user can also override individual status update frequencies using BaseStatusSignal.setUpdateFrequency(double).

      This will wait up to 0.100 seconds (100ms) for each status frame.

      Parameters:
      optimizedFreq - The update frequency to apply to the optimized status signals. A frequency of 0 Hz will turn off the signals. Otherwise, the minimum supported signal frequency is 4 Hz (default).
      devices - Devices for which to opimize bus utilization
      Returns:
      Status code of the first failed optimize call, or OK if all succeeded

    • resetSignalFrequencies

      public final StatusCode resetSignalFrequencies()
      Resets the update frequencies of all the device's status signals to the defaults.

      This restores the default update frequency of all status signals, including status signals explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) and status signals optimized out using optimizeBusUtilization().

      This will wait up to 0.100 seconds (100ms) for each signal by default.

      Specified by:
      resetSignalFrequencies in interface CommonDevice
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • resetSignalFrequencies

      public final StatusCode resetSignalFrequencies(double timeoutSeconds)
      Resets the update frequencies of all the device's status signals to the defaults.

      This restores the default update frequency of all status signals, including status signals explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) and status signals optimized out using optimizeBusUtilization().

      Specified by:
      resetSignalFrequencies in interface CommonDevice
      Parameters:
      timeoutSeconds - Maximum amount of time to wait for each status frame when performing the action
      Returns:
      Status code of the first failed update frequency set call, or OK if all succeeded

    • resetSignalFrequenciesForAll

      public static StatusCode resetSignalFrequenciesForAll(CommonDevice... devices)
      Resets the update frequencies of all the devices' status signals to the defaults.

      This restores the default update frequency of all status signals, including status signals explicitly given an update frequency using BaseStatusSignal.setUpdateFrequency(double) and status signals optimized out using optimizeBusUtilizationForAll(CommonDevice...).

      This will wait up to 0.100 seconds (100ms) for each status frame.

      Parameters:
      devices - Devices for which to restore default update frequencies
      Returns:
      Status code of the first failed restore call, or OK if all succeeded

    • setControlPrivate

      protected StatusCode setControlPrivate(ControlRequest request)

    • lookupStatusSignal

      protected final <T> StatusSignal<T> lookupStatusSignal(int spn, String signalName, Class<T> classOfSignal, DoubleFunction<T> toValue, boolean reportOnConstruction, boolean refresh)

    • lookupStatusSignal

      protected final <T> StatusSignal<T> lookupStatusSignal(int spn, String signalName, ParentDevice.MapGenerator unitsGenerator, Class<T> classOfSignal, DoubleFunction<T> toValue, boolean reportOnConstruction, boolean refresh)

    • registerAlerts

      public void registerAlerts(AlertableCollection collection)
      Description copied from interface: PhoenixAlertable
      Registers all alerts for this type to the provided collection.

      When registering alerts, the provided alert IDs must be unique within the AlertableCollection. As a result, the IDs should generally contain information unique to this specific instance, such as device and signal name.

      Specified by:
      registerAlerts in interface PhoenixAlertable
      Parameters:
      collection - Alertable collection into which the alerts are registered